Premium universal tensile testing machine supplier? The measurement and control system is designed purposely for microcomputer controlled electronic universal testing machine. With the personal computer and interface plate, it could collect, save, process and print test results. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force, maximum deformation, yielding point and elastic modulus. This system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function. Read even more info at din abrasion tester.

Reagent Preparation: Prepare corresponding reagents according to different test standards and keep them as standby. If sodium perborate is required in the test, the preheating temperature shall not exceed 60℃ when preparing the solution, and it shall be used within 30 minutes at most to prevent the loss of oxidant. Solution Warm-up: Put the specified volume of solution and a specified number of steel balls into the stainless steel cup, put the stainless steel cup into the launderometer for a few minutes, preheat to the specified temperature. Then put in the prepared sample for test.

Correct use of computerized universal testing machine: It is strictly forbidden to use the Computerized Universal Tensile Strength Testing Machine price for overload and super speed. It is strictly forbidden to hit the lifting screw with hard objects and put on the lubricating oil on time. When mechanically replacing the V-belt, pay attention to the position of the hand to prevent pinching the finger. The transmission part must be covered with a protective cover.

Fabric color fastness to light machine Feature: The 2500W long arc xenon lamp is used to simulate the solar spectrum. High transmittance of filter combinations and use 95% of the transmittance filters and filter cartridges. With Low power consumption but achieve the same irradiation light requirements. To make the machine is more energy saving and environment friendly. Standard equipped with 420nm wave band, irradiance digital setting, real time monitoring, closed loop automatic regulation, providing the most stable irradiance test light source for different standards (340nm, 420nm, 300-400nm and 300-800nm band optional ). Test and radio transmission are powered by using light conversion technology, no additional power supply is required. With industrial temperature control (refrigeration) system for smoothly and fast adjusting temperature in test chamber.

Pneumatic Bursting Strength Testing Machine For determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area. Provide with a digital readout of pressure with peak value hold facility, renewable rubber diaphragms, and manual clamping device with acrylic bell, forward reverse and neutral drive system. Provide accurate elongation information of fabrics, up to 0.1mm.

Universal testing machine (also known as tensile testing machine) that performs tensile, compression, flexure, peel, tear, shear, friction, and other types of mechanical testing in accordance with ASTM, ISO, and other industry standards. GESTER Abrasion Tester Professional manufacturer, providing a full range of solutions, Martindale Abrasion Tester in line with ASTM, ISO and other standard requirements, factory direct sales. Discover additional information at https://www.gesterinstruments.com/.

ASTM D4060 Taber Abrasion Testing: Taber rotary type abrasion tester is a specification that determines the “Abrasion Resistance of Organic Coatings by the Taber Abraser.” Although written for organic coatings, the same method applies to inorganic coatings. At the conclusion of testing the sample(s) are then re-weighed. The wear index is then calculated by taking the average mass loss per 1,000 cycles per section 12 of ASTM D4060. Assured Testing Services has multiple taber abrasion machines that meet the ASTM D4060 standard. One of our machines is shown with an exposed sample on this page.