Double surface planer manufacturer today: The most common application involves gluing a coating (veneer, laminate, composite, PVC etc) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood etc). The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous options, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator. Discover even more information at double planer machine.

The radial arm saw is pretty much a portable circular saw that glides on an adjustable arm suspended over a fixed cutting surface. The blade and motor are connected to the arm by a yoke, which is adjustable along both horizontal and vertical planes, enabling the saw to be swung in a variety of directions. For cross-cut work, position the board flush with the fence at the rear of the saw and draw the blade across the wood. The bevel lock allows the saw to be tilted for cutting angles. You can set it to the desired angle using the protractor on the saw housing. The saw can be swivelled right or left for mitring, or turned a full 90 degrees for ripping. The blade can also be raised or lowered using a crank. The size of the saw is determined by the dimension of the blade the saw can accommodate. As an example a model using a 10 inch blade would be able to cut work-pieces up to 3 inches thick.

Presses have advanced over the past decade, enabling manufacturers to improve their efficiency and flexibility. Typical woodworking presses provide different solutions, such as heated, cold, vacuum, or frame and if you can’t find exactly what you need V-hold Machinery can design and make a machine for you. Presses that operate plane to plane are called platen presses. Virtually any component that goes into a wood or composite panel construction can be manufactured in a process utilising a cold or hot platen style press. Hop presses use heating platens or rollers, heated with steam, oil or electricity. Cold presses use ambient platens, or rollers to generate force. The amount of temperature, pressure, time and moisture content all factor into how the process works.

A small tool grinders are a must woodworking machines in shops for sharpening and shaping various tools used in the shop. The grinder has two grinding wheels fastened on to the two ends of a rotating spindle which is driven by a small electric motor. Generally, one of the wheels is used for coarse grinding while the other for fine grinding. Sometimes one of the wheels, particularly which is softer, is provided with a wet-grinding attachment. They are employed for curved surfaces and use abrasive disc and vertical abrasive spindle. During operation, the disc or the spindle as the case may be, rotates and performs the work.

The next woodworking machines are band saws. The band saw is designed to cut wood by means of an endless metal saw band that travels over the rims of two or more rotating wheels. Other parts of a band saw are frame, table, saw guides, saw tensioning arrangement, etc. Although the number of operation that can be performed on a band saw is less than those of a circular saw, it is most useful for making curved or irregular cuts in wood.

The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Find even more information at v-holdmachinery.com.

Situated in Lunjiao town, Shunde district of Foshan city, the biggest woodworking machinery production base as well as “the Chinese leading woodworking machinery town”, V-HOLD woodworking machinery manufacture Co.,Ltd is a large well-known company integrated woodworking machinery research, processing, marketing as well as application service. We have one year warranty lifetime maintenance service. 2. For any technical problems you can contact us immediately. We have overseas repair and On-going Technical Support.